D.
Plug in the power adapter for each level Slave KVM Switch and connect
Slave KVM switch to computers.
E.
The power on sequence should be:
1.
Master KVM Switch
2.
Second level Slave KVM Switch (connect to Master KVM Switch) if
needed.
3.
Third level Slave KVM Switch (connect to second level Slave KVM
Switch) if needed.
4.
All computers connected to the Master/Slave KVM Switch.
F.
After all KVM Switches are powered by power adaptors, turn on the
computers.
z
Initial Plug-in Process:
Please plug in the Master KVM Switch first before turning on any
other devices such as monitors or computers.
z
Hot plugging and hot swapping:
The KVM switch supports hot plugging and hot swapping.
12
Summary of Contents for KVM-440
Page 1: ...D Link KVM 440 KVM 450 8 16 Port Combo KVM Switch User Manual Version 1 00...
Page 7: ...7...
Page 13: ...Figure 10 Cascade chaining 13...
Page 14: ......