12
Using the Configuration Utility (continued)
Home > Wizard
Home > LAN
This
Setup Wizard
screen will appear. Click
Run Wizard
and the
utility will guide you
through a simple setup.
Home
Set as Default Interface:
Select
Yes
for
Wired
.
Select
No
for
Wireless
.
When you select No, you will
be directed to the Wireless
interface (shown on the next
page).
Dynamic IP:
Select to
obtain an IP address from a
DHCP server.
Static IP:
Select to manually
assign an IP address.
Static IP Address:
Enter the
address here.
Subnet Mask:
Enter the
subnet mask here.
Gateway Address:
Enter
the address here.
DNS IP Address:
Enter the IP address of the Domain Name Service. DNS is an Internet
service that translates domain names into IP addresses
Apply:
Click
Apply
to save the changes.
