D-Link NetDefend DFL-260E User Manual Download | Manualshive

Page: 126 / 552

background image

Using Reject

In certain situations the Reject action is recommended instead of the Drop action because a "polite"
reply is required from NetDefendOS. An example of such a situation is when responding to the
IDENT user identification protocol. Some applications will pause for a timeout if Drop is used and
Reject can avoid such processing delays.

3.5.4. Editing IP rule set Entries

After adding various rules to the rule set editing any rule can be achieved in the Web Interface by
right clicking on that line.

A context menu will appear with the following options:

Edit

This allows the contents of the rule to be changed.

Delete

This will remove the rule permanently from the rule set.

Disable/Enable

This allows the rule to be disabled but left in the rule set. While disabled the
rule set line will not affect traffic flow and will appear grayed out in the user
interface. It can be re-enabled at any time.

Move options

The last section of the context menu allows the rule to be moved to a
different position in the rule set and therefore have a different precedence

3.5.5. IP Rule Set Folders

In order to help organise large numbers of entries in IP rule sets, it is possible to create IP rule set
folders. These folders are just like a folder in a computer's file system. They are created with a given
name and can then be used to contain all the IP rules that are related together as a group.

Using folders is simply a way for the administrator to conveniently divide up IP rule set entries and
no special properties are given to entries in different folders. NetDefendOS continues to see all
entries as though they were in a single set of IP rules.

The folder concept is also used by NetDefendOS in the address book, where related IP address
objects can be grouped together in administrator created folders.

Example 3.16. Adding an Allow IP Rule

This example shows how to create a simple Allow rule that will allow HTTP connections to be opened from the
lannet network on the lan interface to any network (all-nets) on the wan interface.

Command-Line Interface

First, change the current category to be the main IP rule set:

gw-world:/> cc IPRuleSet main

Now, create the IP rule:

gw-world:/main> add IPRule Action=Allow Service=http

SourceInterface=lan SourceNetwork=lannet
DestinationInterface=wan
DestinationNetwork=all-nets
Name=lan_http

Return to the top level:

gw-world:/main> cc

3.5.4. Editing IP rule set Entries

Chapter 3. Fundamentals

126

«
...
124
125
126
127
128
...
»

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

FortiGate FortiGate-500

Brand: Fortinet Pages: 2

FortiGate 50B-LENC

Brand: Fortinet Pages: 2

FortiGate Voice Series

Brand: Fortinet Pages: 14

FortiAnalyzer-2000

Brand: Fortinet Pages: 2

FortiGate FortiGate-3810A

Brand: Fortinet Pages: 62

FortiSwitch-5003

Brand: Fortinet Pages: 128

Unified Security Gateway ZyWALL 300

Brand: ZyXEL Communications Pages: 1156

Brand: Tosibox Pages: 70

Brand: Watchguard Pages: 2

Brand: Global Technology Associates Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands