D-Link NetDefend DFL-260E User Manual Download | Manualshive

Page: 128 / 552

background image

A Simple Example

As an example, consider the IP rule set main which contains just two rules to allow web surfing
from an internal network and a third Drop-all rule to catch any other traffic so that it can be logged:

Note

The screen images used in this example show just the first few columns of the object
properties.

We would like to create an object group for the two IP rules for web surfing. This is done with the
following steps:

•

Select the first object to be in the new group by right clicking it.

•

Select the New Group option from the context menu.

•

A group is now created with a title line and the IP rule as its only member. The default title of
"(new Group)" is used.

The entire group is also assigned a default color and the group member is also indented. The
object inside the group retains the same index number to indicate its position in the whole table.
The index is not affected by group membership. The group title line does not have or need an
index number since it is only a textual label.

Editing Group Properties

To change the properties of a group, right click the group title line and select the Edit option from
the context menu.

3.5.6. Configuration Object Groups

Chapter 3. Fundamentals

128

«
...
126
127
128
129
130
...
»

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

Brand: StarTech.com Pages: 2

ADSL 2+ Security Gateway

Brand: ZyXEL Communications Pages: 2

TECHDOCS ION 9000

Brand: PaloAlto Networks Pages: 32

Brand: Trend Micro Pages: 2

Brand: Resolution Pages: 2

Brand: Excelsecu Data Technology Co., Ltd. Pages: 17

Brand: Billion Pages: 2

Brand: BuildingLink Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands