D-Link NetDefend DFL-260E User Manual Download | Manualshive

Page: 131 / 552

background image

3.6. Schedules

In some scenarios, it might be useful to control not only what functionality is enabled, but also when
that functionality is being used.

For instance, the IT policy of an enterprise might stipulate that web traffic from a certain department
is only allowed access outside that department during normal office hours. Another example might
be that authentication using a specific VPN connection is only permitted on weekdays before noon.

Schedule Objects

NetDefendOS addresses this requirement by providing Schedule objects (often referred to as simply
schedules) that can be selected and used with various types of security policies to accomplish
time-based control.

Multiple Time Ranges

A Schedule object also offers the possibility to enter multiple time ranges for each day of the week.
Furthermore, a start and a stop date can be specified that will impose additional constraints on the
schedule. For instance, a schedule can be defined as Mondays and Tuesdays, 08:30 - 10:40 and
11:30 - 14:00, Fridays 14:30 - 17:00.

Schedule Parameters

Each schedule object consists of the following parameters:

Name

The name of the schedule. This is used in user interface display and as a
reference to the schedule from other objects.

Scheduled Times

These are the times during each week when the schedule is applied. Times
are specified as being to the nearest hour. A schedule is either active or
inactive during each hour of each day of a week.

Start Date

If this option is used, it is the date after which this schedule object becomes
active.

End Date

If this option is used, it is the date after which this schedule object is no
longer active.

Comment

Any descriptive text that should be associated with the object.

This functionality is not limited to IP Rules, but is valid for most types of policies, including Traffic
Shaping rules, Intrusion Detection and Prevention (IDP) rules and Virtual Routing rules. including
Traffic Shaping rules and Intrusion Detection and Prevention (IDP) rules. A Schedule object is, in
other words, a very powerful component that can allow detailed regulation of when functions in
NetDefendOS are enabled or disabled.

Important: Set the system date and time

As schedules depend on an accurate system date and time, it is very important that the
system date and time are set correctly. This is also important for some other features
such as certificate usage in VPN tunnels.

Preferably, time synchronization has also been enabled to ensure that scheduled
policies will be enabled and disabled at the right time. For more information, please
see Section 3.8, “Date and Time”.

3.6. Schedules

Chapter 3. Fundamentals

131

«
...
129
130
131
132
133
...
»

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

ProSAFE FVS318G v2

Brand: NETGEAR Pages: 2

NetDefend DFL-860E

Brand: D-Link Pages: 6

Brand: NETGEAR Pages: 20

Brand: Andrisoft Pages: 131

FortiGate FortiGate-5001FA2

Brand: Fortinet Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands