D-Link NetDefend DFL-260E User Manual Download | Manualshive

Page: 16 / 552

background image

Chapter 1. NetDefendOS Overview

This chapter outlines the key features of NetDefendOS.

• Features, page 16

• NetDefendOS Architecture, page 19

• NetDefendOS State Engine Packet Flow, page 23

1.1. Features

D-Link NetDefendOS is the base software engine that drives and controls the range of NetDefend
Firewall hardware products.

NetDefendOS as a Network Security Operating System

Designed as a network security operating system, NetDefendOS features high throughput
performance with high reliability plus super-granular control. In contrast to products built on top of
standard operating systems such as Unix or Microsoft Windows, NetDefendOS offers seamless
integration of all its subsystems, in-depth administrative control of all functionality, as well as a
minimal attack surface which helps to negate the risk from security attacks.

NetDefendOS Objects

From the administrator's perspective the conceptual approach of NetDefendOS is to visualize
operations through a set of logical building blocks or objects. These objects allow the configuration
of NetDefendOS in an almost limitless number of different ways. This granular control allows the
administrator to meet the requirements of the most demanding network security scenarios.

Key Features

NetDefendOS has an extensive feature set. The list below presents the key features of the product:

IP Routing

NetDefendOS provides a variety of options for IP routing
including static routing, dynamic routing, as well as multicast
routing capabilities. In addition, NetDefendOS supports
features such as Virtual LANs, Route Monitoring, Proxy ARP
and

Transparency.

For

more

information,

please

see

Chapter 4, Routing.

Firewalling Policies

NetDefendOS provides stateful inspection-based firewalling
for a wide range of protocols such as TCP, UDP and ICMP.
The administrator can define detailed firewalling policies
based on source/destination network/interface, protocol,
ports, user credentials, time-of-day and more. Section 3.5, “IP
Rule Sets”, describes how to set up these policies to
determine

what

traffic

is

allowed

or

rejected

by

NetDefendOS.

Address Translation

For functionality as well as security reasons, NetDefendOS
supports policy-based address translation. Dynamic Address
Translation (NAT) as well as Static Address Translation
(SAT) is supported, and resolves most types of address
translation needs. This feature is covered in Chapter 7,
Address Translation.

16

«
...
14
15
16
17
18
...
»

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

Brand: Draytek Pages: 1

StoneGate FW-1020

Brand: Stonesoft Pages: 34

Brand: Palo Alto Pages: 44

Brand: Check Point Pages: 4

Brand: Trend Micro Pages: 69

Brand: Eli Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands