D-Link NetDefend DFL-260E User Manual Download | Manualshive

Page: 160 / 552

background image

As part of Route Properties Host Monitoring can be enabled and a single route can have multiple
hosts associated with it for monitoring. Multiple hosts can provide a higher certainty that any
network problem resides in the local network rather than because one remote host itself is down.

In association with Host Monitoring there are two numerical parameters for a route:

Grace Period

This is the period of time after startup or after reconfiguration
of the NetDefend Firewall which NetDefendOS will wait
before starting Route Monitoring. This waiting period allows
time for all network links to initialize once the firewall comes
online.

Minimum Number of Hosts
Available

This is the minimum number of hosts that must be considered
to be accessible before the route is deemed to have failed. The
criteria for host accessibility are described below.

Specifying Hosts

For each host specified for host monitoring there are a number of property parameters that should be
set:

•

Method

The method by which the host is to be polled. This can be one of:

•

ICMP - ICMP "Ping" polling. An IP address must be specified for this.

•

TCP - A TCP connection is established to and then disconnected from the host. An IP
address must be specified for this.

•

HTTP - A normal HTTP server request using a URL. A URL must be specified for this as
well as a text string which is the beginning (or complete) text of a valid response. If no text
is specified, any response from the server will be valid.

•

IP Address

The IP address of the host when using the ICMP or TCP option.

•

Port Number

The port number for polling when using the TCP option.

•

Interval

The interval in milliseconds between polling attempts. The default setting is 10,000 and the
minimum value allowed is 100 ms.

•

Sample

The number of polling attempts used as a sample size for calculating the Percentage Loss and
the Average Latency. This value cannot be less than 1.

•

Maximum Failed Poll Attempts

The maximum permissible number of polling attempts that fail. If this number is exceeded then
the host is considered unreachable.

•

Max Average Latency

The maximum number of milliseconds allowable between a poll request and the response. If this
threshold is exceeded then the host is considered unreachable. Average Latency is calculated by
averaging the response times from the host. If a polling attempt receives no response then it is
not included in the averaging calculation.

4.2.4. Host Monitoring for Route
Failover

Chapter 4. Routing

160

«
...
158
159
160
161
162
...
»

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

CyBlock Mini Appliance

Brand: Wavecrest Pages: 3

freeGuard Slim 100

Brand: Freedom9 Pages: 170

Brand: Brocade Communications Systems Pages: 106

Brand: Celestix Pages: 70

H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE

Brand: 3Com Pages: 158

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands