D-Link NetDefend DFL-260E User Manual Download

Page: 180 / 552

Authentication.

All OSPF protocol exchanges can, if required, be authenticated. This means that only routers with
the correct authentication can join an AS. Different authentication schemes can be used and with
NetDefendOS the scheme can be either a passphrase or an MD5 digest.

It is possible to configure separate authentication methods for each AS.

OSPF Areas

An OSPF Area consists of networks and hosts within an AS that have been grouped together.
Routers that are only within an area are called internal routers. All interfaces on internal routers are
directly connected to networks within the area.

The topology of an area is hidden from the rest of the AS. This information hiding reduces the
amount of routing traffic exchanged. Also, routing within the area is determined only by the area's
own topology, lending the area protection from bad routing data. An area is a generalization of an IP
sub netted network.

In NetDefendOS, areas are defined by OSPF Area objects and are added to the AS which is itself
defined by an OSPF Router object. There can be more than one area within an AS so multiple OSPF
Area objects could be added to a single OSPF Router. In most cases, one is enough and it should be
defined separately on each NetDefend Firewall which will be part of the OSPF network.

This NetDefendOS object is described further in Section 4.5.3.2, “OSPF Area”.

OSPF Area Components

A summary of OSPF components related to an area is given below:

ABRs

Area Border Routers are routers that have interfaces connected to more than
one area. These maintain a separate topological database for each area to
which they have an interface.

ASBRs

Routers that exchange routing information with routers in other Autonomous
Systems are called Autonomous System Boundary Routers. They advertise
externally learned routes throughout the Autonomous System.

Backbone Areas

All OSPF networks need to have at least the Backbone Area which is the
OSPF area with an ID of 0. This is the area that other related areas should be
connected to. The backbone ensures routing information is distributed
between connected areas. When an area is not directly connected to the
backbone it needs a virtual link to it.

OSPF networks should be designed by beginning with the backbone.

Stub Areas

Stub areas are areas through which or into which AS external advertisements
are not flooded. When an area is configured as a stub area, the router will
automatically advertise a default route so that routers in the stub area can
reach destinations outside the area.

Transit Areas

Transit areas are used to pass traffic from an area that is not directly
connected to the backbone area.

The Designated Router

Each OSPF broadcast network has a single Designated Router (DR) and a single Backup Designated
Router. The routers use OSPF Hello messages to elect the DR and BDR for the network based on

D-Link NetDefend DFL-260E, User Manual

Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands