manualshive.com logo in svg

D-Link NetDefend DFL-260E, User Manual

The D-Link NetDefend DFL-260E is a powerful network security appliance designed to safeguard your data and network infrastructure. Ensure a seamless setup with the Quick Installation Manual, available for free download from 88.208.23.73:8080. Discover comprehensive instructions and get the most out of your device hassle-free.

Share
Download
background image

servers are queried to assess the likelihood that the email is Spam, based on its origin address. The
NetDefendOS administrator assigns a weight greater than zero to each configured server so that a
weighted sum can then be calculated based on all responses. The administrator can configure one of
the following actions based on the weighted sum calculated:

1.

Dropped

If the sum is greater than or equal to a predefined Drop threshold then the email is considered
to be definitely Spam and is discarded or alternatively sent to a single, special mailbox.

If it is discarded then the administrator has the option that an error message is sent back to the
sending SMTP server (this error message is similar to the one used with blacklisting).

2.

Flagged as Spam

If the sum is greater than or equal to a predefined Spam threshold then the email is considered
as probably being Spam but forwarded to the recipient with notifying text inserted into it.

A Threshold Calculation Example

As an example, lets suppose that three DNSBL servers are configured: dnsbl1, dnsbl2 and dnsbl3.
Weights of 3, 2 and 2 are assigned to these respectively. The Spam threshold is then set to be 5.

If dnsbl1 and dnsbl2 say an email is Spam but dnsbl3 does not, then the total calculated will be
3+2+0=5. Since the total of 5 is equal to (or greater than) the threshold then the email will be treated
as Spam.

If the Drop threshold in this example is set at 7 then all three DNSBL servers would have to respond
in order for the calculated sum to cause the email to be dropped (3+2+2=7).

Alternative Actions for Dropped Spam

If the calculated sum is greater than or equal to the Drop threshold value then the email is not
forwarded to the intended recipient. Instead the administrator can choose one of two alternatives for
dropped email:

•

A special email address can be configured to receive all dropped email. If this is done then any
TXT messages sent by the DNSBL servers (described next) that identified the email as Spam can
be optionally inserted by NetDefendOS into the header of the forwarded email.

•

If no receiver email address is configured for dropped emails then they are discarded by
NetDefendOS. The administrator can specify that an error message is sent back to the sender
address along with the TXT messages from the DNSBL servers that failed the email.

Tagging Spam

If an email is considered to be probably Spam because the calculated sum is above the Spam
threshold but it is below the Drop threshold, then the Subject field of the email is changed and
pre-fixed with a message and the email is forwarded on to the intended recipient. The tag message
text is specified by the administrator but can be left blank (although that is not recommended).

An example of tagging might be if the original Subject field is:

Buy this stock today!

And if the tag text is defined to be "*** SPAM ***", then the modified email's Subject field will
become:

*** SPAM *** Buy this stock today!

6.2.5. The SMTP ALG

Chapter 6. Security Mechanisms

264

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

Lightning SA MultiCom User Manual preview
MultiCom
Brand: Lightning SA Pages: 172
3Com 3CR3MFA-92 Installation Manual preview
3CR3MFA-92
Brand: 3Com Pages: 176
Dell TZ 105 Specifications preview
TZ 105
Brand: Dell Pages: 8
Moxa Technologies EtherFire IEF-G9010-2MGSFP Series Quick Installation Manual preview
EtherFire IEF-G9010-2MGSFP Series
Brand: Moxa Technologies Pages: 11
AhnLab TrusGuard Installation Manual preview
TrusGuard
Brand: AhnLab Pages: 120

Brands by name

Popular brands

Load more brands