Now apply the Pre-shared Key to the IPsec tunnel:
gw-world:/> set Interface IPsecTunnel MyIPsecTunnel PSK=MyPSK
Web Interface
First create a Pre-shared Key:
1.
Go to Objects > Authentication Objects > Add > Pre-shared key
2.
Enter a name for the pre-shared key, for example MyPSK
3.
Choose Hexadecimal Key and click Generate Random Key to generate a key to the Passphrase textbox
4.
Click OK
Then, apply the pre-shared key to the IPsec tunnel:
1.
Go to Interfaces > IPsec
2.
Select the target IPsec tunnel object
3.
Under the Authentication tab, choose Pre-shared Key and select MyPSK
4.
Click OK
9.3.8. Identification Lists
When certificates are used as authentication method for IPsec tunnels, the NetDefend Firewall will
accept all remote devices or VPN clients that are capable of presenting a certificate signed by any of
the trusted Certificate Authorities. This can be a potential problem, especially when using roaming
clients.
A Typical Scenario
Consider the scenario of travelling employees being given access to the internal corporate networks
using VPN clients. The organization administers their own Certificate Authority, and certificates
have been issued to the employees. Different groups of employees are likely to have access to
different parts of the internal networks. For example, members of the sales force need access to
servers running the order system, while technical engineers need access to technical databases.
The Problem
Since the IP addresses of the travelling employees VPN clients cannot be known beforehand, the
incoming VPN connections from the clients cannot be differentiated. This means that the firewall is
unable to control the access to various parts of the internal networks.
The ID List Solution
The concept of Identification Lists presents a solution to this problem. An identification list contains
one or more identities (IDs), where each identity corresponds to the subject field in a certificate.
Identification lists can thus be used to regulate what certificates that are given access to what IPsec
tunnels.
Example 9.3. Using an Identity List
This example shows how to create and use an Identification List for use in the VPN tunnel. This Identification List
9.3.8. Identification Lists
Chapter 9. VPN
409
Summary of Contents for NetDefend DFL-260E
