manualshive.com logo in svg

D-Link NetDefend DFL-260E, User Manual

The D-Link NetDefend DFL-260E is a powerful network security appliance designed to safeguard your data and network infrastructure. Ensure a seamless setup with the Quick Installation Manual, available for free download from 88.208.23.73:8080. Discover comprehensive instructions and get the most out of your device hassle-free.

Share
Download
background image

Firewalls. This means that accounting information is automatically updated on both cluster members
whenever a connection is closed. Two special accounting events are also used by the active unit to
keep the passive unit synchronized:

•

An AccountingStart event is sent to the inactive member in an HA setup whenever a response
has been received from the accounting server. This specifies that accounting information should
be stored for a specific authenticated user.

•

A problem with accounting information synchronization could occur if an active unit has an
authenticated user for whom the associated connection times out before it is synchronized on the
inactive unit. To get around this problem, a special AccountingUpdate event is sent to the
passive unit on a timeout and this contains the most recent accounting information for
connections.

2.3.7. Handling Unresponsive Servers

A question arises in the case of a client that sends an AccountingRequest START packet which the
RADIUS server never replies to. NetDefendOS will re-send the request after the user-specified
number of seconds. This will however mean that a user will still have authenticated access while
NetDefendOS is trying to contact to the accounting server.

Only after NetDefendOS has made three attempts to reach the server will it conclude that the
accounting server is unreachable. The administrator can use the NetDefendOS advanced setting
Allow on error to determine how this situation is handled. If this setting is enabled then an already
authenticated user's session will be unaffected. If it is not enabled, any affected user will
automatically be logged out even if they have already been authenticated.

2.3.8. Accounting and System Shutdowns

In the case that the client for some reason fails to send a RADIUS AccountingRequest STOP packet,
the accounting server will never be able to update its user statistics, but will most likely believe that
the session is still active. This situation should be avoided.

In the case that the NetDefend Firewall administrator issues a shutdown command while
authenticated users are still online, the AccountingRequest STOP packet will potentially never be
sent. To avoid this, the advanced setting Logout at shutdown allows the administrator to explicitly
specify that NetDefendOS must first send a STOP message for any authenticated users to any
configured RADIUS servers before commencing with the shutdown.

2.3.9. Limitations with NAT

The User Authentication module in NetDefendOS is based on the user's IP address. Problems can
therefore occur with users who have the same IP address.

This can happen, for example, when several users are behind the same network using NAT to allow
network access through a single external IP address. This means that as soon as one user is
authenticated, traffic coming through that NAT IP address could be assumed to be coming from that
one authenticated user even though it may come from other users on the same network.
NetDefendOS RADIUS Accounting will therefore gather statistics for all the users on the network
together as though they were one user instead of individuals.

2.3.10. RADIUS Advanced Settings

The following advanced settings are available with RADIUS accounting:

Allow on error

If there is no response from a configured RADIUS accounting server when sending accounting data
for a user that has already been authenticated, then enabling this setting means that the user will

2.3.7. Handling Unresponsive Servers

Chapter 2. Management and Maintenance

65

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

Kerio Tech Control Box 1000 Serie Quick Manual preview
Control Box 1000 Serie
Brand: Kerio Tech Pages: 24
Jøtul JGFW-5 Manual preview
JGFW-5
Brand: Jøtul Pages: 12
Fortinet FortiGate 500D Information Supplement preview
FortiGate 500D
Brand: Fortinet Pages: 12
Fortinet FortiGate 1000D Quick Start Manual preview
FortiGate 1000D
Brand: Fortinet Pages: 14
Fortinet FortiGate 300C Quick Start Manual preview
FortiGate 300C
Brand: Fortinet Pages: 20
Fortinet FortiGate 100 Installation Manual preview
FortiGate 100
Brand: Fortinet Pages: 54
Fortinet FortiGate 3000 Installation Manual preview
FortiGate 3000
Brand: Fortinet Pages: 56
XRoads Networks EdgeXOS Platform Notes preview
EdgeXOS
Brand: XRoads Networks Pages: 4
D-Link NetDefend DFL Series Quick Manual / User Manual preview
NetDefend DFL Series
Brand: D-Link Pages: 4
D-Link DFL-210-IPS-12 Datasheet preview
DFL-210-IPS-12
Brand: D-Link Pages: 2
D-Link DFL-1100 - Security Appliance Brochure & Specs preview
DFL-1100 - Security Appliance
Brand: D-Link Pages: 2
D-Link DFL-210 - NetDefend - Security Appliance Quick Installation Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 32

Brands by name

Popular brands

Load more brands