manualshive.com logo in svg

D-Link NetDefend DFL-260E, User Manual

The D-Link NetDefend DFL-260E is a powerful network security appliance designed to safeguard your data and network infrastructure. Ensure a seamless setup with the Quick Installation Manual, available for free download from 88.208.23.73:8080. Discover comprehensive instructions and get the most out of your device hassle-free.

Share
Download
background image

It is possible to have multiple pcapdump executions being performed at the same time. The
following points describe this feature:

1.

All capture from all executions goes to the same memory buffer.

The command can be launched multiple times with different interfaces specified. In this case
the packet flow for the different executions will be grouped together in different sections of the
report.

If a clearer picture of packets flowing between interfaces is required in the output then it is best
to issue one pcapdump command with the interfaces of interest specified.

2.

If no interface is specified then the capture is done on all interfaces.

3.

The -stop option without an interface specified will halt capture on all interfaces.

4.

pcapdump prevents capture running more than once on the same interface by detecting
command duplication.

Filter Expressions

Seeing all packets passing through a particular interface often provides an excess of information to
be useful. To focus on particular types of traffic the pcapdump command has the option to add an
filter expression which has one of the following forms:

-eth=<macaddr> - Filter on source or destination MAC address.
-ethsrc=<macaddr> - Filter on source MAC address.
-ethdest=<macaddr> - Filter on destination MAC address.
-ip=<ipaddr> - Filter source or destination IP address.
-ipsrc=<ipaddr> - Filter on source IP address.
-ipdest=<ipaddr> - Filter on destination IP address.
-port=<portnum> - Filter on source or destination port number.
-srcport=<portnum> - Filter on source port number.
-destport=<portnum> - Filter on destination port number.
-proto=<id> - Filter on protocol where id is the decimal protocol id.
-<protocolname> - Instead of the protocol number, the protocol name alone can be specified and
can be one of -tcp, -udp or -icmp.

Downloading the Output File

As shown in one of the examples above, the -write option of pcapdump can save buffered packet
information to a file on the NetDefend Firewall.

These output files are placed into the NetDefendOS root directory and the file name is specified in
the pcapdump command line, usually with a filetype of .cap. The name of output files must follow
certain rules which are described below. Files can then be downloaded to the local workstation using
Secure Copy (SCP) (see Section 2.1.6, “Secure Copy”). A list of all files in the NetDefendOS root
directory can be viewed by issuing the ls CLI command.

The -cleanup option will erase any saved pcapdump files (including any left over from earlier uses
of the command) so cleanup should only be done after file download is complete.

Note: NetDefendOS keeps track of saved files

NetDefendOS keeps track of all files created by pcapdump. This is true even between
system restarts so the -cleanup option is always able to delete all files from the
firewall's memory.

Output File Naming Restrictions

2.6. The pcapdump Command

Chapter 2. Management and Maintenance

73

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

D-Link NetDefend DFL-800 Quick Manual preview
NetDefend DFL-800
Brand: D-Link Pages: 21
ZyXEL Communications ENTERPRISE NETWORK CENTER Brochure preview
ENTERPRISE NETWORK CENTER
Brand: ZyXEL Communications Pages: 6
Fortinet FortiDDoS 1000B Release Notes preview
FortiDDoS 1000B
Brand: Fortinet Pages: 44
Fortinet FortiGate 5140-R Chassis Manual preview
FortiGate 5140-R
Brand: Fortinet Pages: 32
Huawei USG6306 Quick Start preview
USG6306
Brand: Huawei Pages: 5
Huawei V200R001C01 Troubleshooting Manual preview
V200R001C01
Brand: Huawei Pages: 391
Huawei USG6310 Quick Start preview
USG6310
Brand: Huawei Pages: 4
Huawei V300R001 Parts Replacement preview
V300R001
Brand: Huawei Pages: 228
Huawei USG9500 Series Hardware Manual preview
USG9500 Series
Brand: Huawei Pages: 514
Cisco Meraki MX64W Installation Manual preview
Meraki MX64W
Brand: Cisco Pages: 6
Cisco IronPort C370 Quick Start Manual preview
IronPort C370
Brand: Cisco Pages: 2
Cisco 7030 Datasheet preview
7030
Brand: Cisco Pages: 7
Cisco Firepower 2100 Getting Started Manual preview
Firepower 2100
Brand: Cisco Pages: 222
Huawei USG6305 Quick Start-Up preview
USG6305
Brand: Huawei Pages: 6
McAfee Manager Appliance Quick Start Manual preview
Manager Appliance
Brand: McAfee Pages: 12
Juniper NetScreen-50 User Manual preview
NetScreen-50
Brand: Juniper Pages: 36
Juniper NetScreen-5000 Series Installation And Configuration Manual preview
NetScreen-5000 Series
Brand: Juniper Pages: 68

Brands by name

Popular brands

Load more brands