D-Link NetDefend DFL-260E User Manual Download | Manualshive

Page: 89 / 552

background image

to refer to all protocols. However, using this is not recommended and specifying a narrower service
provides better security.

If, for example, the requirement is only to filter using the principal protocols of TCP, UDP and
ICMP then the service group all_tcpudpicmp can be used instead.

Tip: The http-all service does not include DNS

A common mistake is to assume that the predefined service http-all includes the DNS
protocol. It does not so the predefined service dns-all is usually also required for most
web surfing. This could be included in a group with http-all and then associated with
the IP rules that allow web surfing.

Restrict Services to the Minimum Necessary

When choosing a service object to construct a policy such as an IP rule, the protocols included in
that object should be as few as necessary to achieve the traffic filtering objective. Using the
all_services object may be convenient but removes any security benefits that a more specific service
object could provide.

The best approach is to narrow the service filter in a security policy so it allows only the protocols
that are absolutely necessary. The all_tcpudpicmp service object is often a first choice for general
traffic but even this may allow many more protocols than are normally necessary and the
administrator can often narrow the range of allowed protocols further.

Example 3.8. Creating a Custom TCP/UDP Service

This example shows how to add a TCP/UDP service, using destination port 3306, which is used by MySQL:

Command-Line Interface

gw-world:/> add Service ServiceTCPUDP MySQL

DestinationPorts=3306 Type=TCP

Web Interface

1.

Go to Objects > Services > Add > TCP/UDP service

2.

Specify a suitable name for the service, for example MySQL

3.

Now enter:

•

Type: TCP

•

Source: 0-65535

•

Destination: 3306

4.

Click OK

3.2.3. ICMP Services

Another type of custom service that can be created is an ICMP Service.

The Internet Control Message Protocol (ICMP) is a protocol that is integrated with IP for error
reporting and transmitting control information. For example, the ICMP Ping feature uses ICMP to
test Internet connectivity.

ICMP Types and Codes

3.2.3. ICMP Services

Chapter 3. Fundamentals

89

«
...
87
88
89
90
91
...
»

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefend DFL-260E

FVX538v1 - ProSafe VPN Firewall Dual WAN

Brand: NETGEAR Pages: 2

SecPath F1000-AI-5 Series

Brand: H3C Pages: 70

Brand: NETGEAR Pages: 10

Brand: Lundix It Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands