![background image](http://html1.mh-extra.com/html/d-link/netdefend-dfl-260e/netdefend-dfl-260e_log-reference-manual_3185262465.webp)
2.37.24. waiting_for_ip_to_listen_on (ID: 02800050)
Default Severity
Log Message
L2TP server <iface> cannot start until it has an IP address to listen on
Explanation
The L2TP server cannot start until the L2TP interface has a proper IP
address to listen on.
Gateway Action
None
Recommended Action
Make sure that the IP address is configured correctly on the L2TP
server interface, or that the DHCP server can hand out a proper IP
address to the interface.
Revision
1
Parameters
iface
2.37.25. no_session_found (ID: 02800060)
Default Severity
Log Message
No session found for message sent from <remotegw> on tunnel
<iface>.
Explanation
No session found for message received by the L2TP interface.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
iface
remotegw
Chapter 2: Log Message Reference
465
Summary of Contents for NetDefend DFL-260E
