manualshive.com logo in svg

D-Link NetDefendOS, User Manual

D-Link NetDefendOS, a comprehensive network security solution, offers robust protection for your business. Seamlessly integrating hardware and software, it ensures superior defense against cyber threats. Enhance your experience with our free User Manuals, available for download at 88.208.23.73:8080, offering detailed instructions and insights to optimize your network security settings.

Share
Download
background image

Default:

DropLog

TCP NULL

Specifies how NetDefendOS will deal with TCP packets that do not have any of the SYN, ACK, FIN
or RST flags turned on. According to the TCP standard, such packets are illegal and are used by
both OS Fingerprinting and stealth port scanners, as some firewalls are unable to detect them.

Default:

DropLog

TCP Sequence Numbers

Determines if the sequence number range occupied by a TCP segment will be compared to the
receive window announced by the receiving peer before the segment is forwarded.

TCP sequence number validation is only possible on connections tracked by the state-engine
(not on packets forwarded using a

FwdFast

rule).

Possible values are:
•

Ignore

- Do not validate. Means that sequence number validation is completely turned off.

•

ValidateSilent

- Validate and pass on.

•

ValidateLogBad

- Validate and pass on, log if bad.

•

ValidateReopen

- Validate reopen attempt like normal traffic; validate and pass on.

•

ValidateReopenLog

- Validate reopen attempts like normal traffic; validate, log if bad.

•

ReopenValidate

- Do not validate reopen attempts at all; validate and pass on.

•

ReopenValidLog

- Do not validate reopen attempts at all; validate, log if bad.

Default:

ValidateLogBad

Notes on the TCPSequenceNumbers setting

The default

ValidateLogBad

(or the alternative

ValidateSilent

) will allow the de-facto behavior of

TCP re-open attempts, meaning that they will reject re-open attempts with a previously used
sequence number.

ValidateReopen

and

ValidReopenLog

are special settings giving the default behavior found in

older NetDefendOS versions where only re-open attempts using a sequence number falling
inside the current (or last used) TCP window will be allowed. This is more restrictive than

ValidateLogBad

/

ValidateSilent

, and will block some valid TCP re-open attempts. The most

significant impact of this will be that common web-surfing traffic (short but complete
transactions requested from a relatively small set of clients, randomly occurring with an interval
of a few seconds) will slow down considerably, while most "normal" TCP traffic will continue to
work as usual.

Using either

ValidateReopen

or

ValidateReopenLog

is, however, not recommended since the same

effect can be achieved by disallowing TCP re-open attempts altogether. These settings exist
mostly for backwards compatibility.

ReopenValidate

and

ReopenValidLog

are less restrictive variants than

ValidateLogBad

or

ValidateSilent

. Certain clients and/or operating systems might attempt to use a randomized

sequence number when re-opening an old TCP connection (usually out of a concern for security)
and this may not work well with these settings. Again, web-surfing traffic is most likely to be
affected, although the impact is likely to occur randomly. Using these values instead of the
default setting will completely disable sequence number validation for TCP re-open attempts.
Once the connection has been established, normal TCP sequence number validation will be
resumed.

Chapter 13: Advanced Settings

857

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Clavister Eagle E20 Getting Started Manual preview
Eagle E20
Brand: Clavister Pages: 76
Fortinet FortiGate 240D Quick Start Manual preview
FortiGate 240D
Brand: Fortinet Pages: 12
Ronde & Schwarz GP-E User Manual preview
GP-E
Brand: Ronde & Schwarz Pages: 129
D-Link DIR-330 - Wireless G VPN Router Brochure & Specs preview
DIR-330 - Wireless G VPN Router
Brand: D-Link Pages: 3
Watchguard Firebox M4600 Hardware Manual preview
Firebox M4600
Brand: Watchguard Pages: 34
ei3 Amphion S14-H Green Box User Manual preview
Amphion S14-H Green Box
Brand: ei3 Pages: 26
Crossport Systems Pivio User Manual preview
Pivio
Brand: Crossport Systems Pages: 60
Belkin F5U501I (Italian) Manual preview
F5U501I
Brand: Belkin Pages: 17
Belkin F5U501F (French) Manuel Du Propriétaire preview
F5U501F
Brand: Belkin Pages: 17
Belkin F5U501G (German) Manual preview
F5U501G
Brand: Belkin Pages: 17
Alcatel-Lucent VPN Firewall Specification Sheet preview
VPN Firewall
Brand: Alcatel-Lucent Pages: 2

Brands by name

Popular brands

Load more brands