manualshive.com logo in svg

D-Link SECURICAM Network DDCS-950G, User Manual

Looking to enhance your security system? The D-Link SECURICAM Network DDCS-950G is a top-notch surveillance solution. Capture every detail with its high-resolution camera and enjoy peace of mind. For easy setup and optimal usage, download the free user manual from 88.208.23.73:8080 and make the most of your device.

Share
Download
background image

ii 

MAINTENANCE > Device Management ........................................................................................................................................................... 67 
MAINTENANCE > Backup and Restore............................................................................................................................................................ 69 
MAINTENANCE > Firmware Update ................................................................................................................................................................ 70 

STATUS ....................................................................................................................................................................................................................... 71 

STATUS> Device Info ........................................................................................................................................................................................ 71 

HELP............................................................................................................................................................................................................................ 72 

Installing the DCS-950G Behind a Router .......................................................................................................................................................................... 73 

Single Camera Installation ........................................................................................................................................................................................... 73 
Multiple Camera Installation ....................................................................................................................................................................................... 73 

1) Identify Your Camera on the Network ............................................................................................................................................................ 74 
2) Assign a Local IP Address for Your Camera .................................................................................................................................................. 75 

Assigning and Opening the HTTP Port on the DCS-950G.......................................................................................................................................... 76 

3) Open the HTTP Port ........................................................................................................................................................................................ 76 

Router Setup and Installation....................................................................................................................................................................................... 77 
Assigning and Opening Virtual Server Ports ............................................................................................................................................................... 78 

4) Open Virtual Server Ports To Enable Remote Image Viewing ....................................................................................................................... 78 

Viewing Your Camera .................................................................................................................................................................................................. 80 

IPView SE Application Installation ..................................................................................................................................................................................... 81 
IPView SE............................................................................................................................................................................................................................ 87 

IPView SE Icon Description ........................................................................................................................................................................................ 88 
How to Add a New Camera ......................................................................................................................................................................................... 89 
How to Delete a Camera .............................................................................................................................................................................................. 92 
How to Change the IP Address .................................................................................................................................................................................... 93 
How to Format the Camera View................................................................................................................................................................................. 94 
How to Rotate the View ............................................................................................................................................................................................... 95 

View/List.............................................................................................................................................................................................................. 96 
Zoom .................................................................................................................................................................................................................... 96 
Color Setting ........................................................................................................................................................................................................ 97 
Wake Up Control Panel ....................................................................................................................................................................................... 97 
Always on Top ..................................................................................................................................................................................................... 97 
Close..................................................................................................................................................................................................................... 97 

How to take a Snap-Shot with the Camera .................................................................................................................................................................. 98 
How to Start Recording................................................................................................................................................................................................ 99 
How to Stop Recording................................................................................................................................................................................................ 99 

Summary of Contents for SECURICAM Network DDCS-950G
























































































































Reviews:

No comments

Related manuals for SECURICAM Network DDCS-950G

Samsung TL205 Quick Start Manual preview
TL205
Brand: Samsung Pages: 24
Samsung TL205 Manual Del Usuario preview
TL205
Brand: Samsung Pages: 100
Samsung ST65 Manual Del Usuario preview
ST65
Brand: Samsung Pages: 107
Samsung SL820 - Digital Camera - Compact Quick Start Manual preview
SL820 - Digital Camera - Compact
Brand: Samsung Pages: 22
Samsung SL820 - Digital Camera - Compact Manual Del Usuario preview
SL820 - Digital Camera - Compact
Brand: Samsung Pages: 95
Samsung SL630 Manual Del Usuario preview
SL630
Brand: Samsung Pages: 103
Samsung SL605 Manual Del Usuario preview
SL605
Brand: Samsung Pages: 99
Samsung SL502 - Digital Camera - Compact User Manual preview
SL502 - Digital Camera - Compact
Brand: Samsung Pages: 102
Samsung SL50 Manual Del Usuario preview
SL50
Brand: Samsung Pages: 98
Samsung SL35 - Digital Camera - Compact Quick Start Manual preview
SL35 - Digital Camera - Compact
Brand: Samsung Pages: 22
Samsung SL40 Manual Del Usuario preview
SL40
Brand: Samsung Pages: 98
Samsung SL35 - Digital Camera - Compact Manual Del Usuario preview
SL35 - Digital Camera - Compact
Brand: Samsung Pages: 102
Samsung SL201 - Digital Camera - Compact Manual Del Usuario preview
SL201 - Digital Camera - Compact
Brand: Samsung Pages: 98
Samsung SL102 - Digital Camera - Compact Quick Start Manual preview
SL102 - Digital Camera - Compact
Brand: Samsung Pages: 24
Samsung TL105 User Manual preview
TL105
Brand: Samsung Pages: 106
Samsung SL720 - Digital Camera - Compact User Manual preview
SL720 - Digital Camera - Compact
Brand: Samsung Pages: 96
Samsung SL820 - Digital Camera - Compact Quick Reference preview
SL820 - Digital Camera - Compact
Brand: Samsung Pages: 95
Samsung SL605 User Manual preview
SL605
Brand: Samsung Pages: 99

Brands by name

Popular brands

Load more brands