D-Link DNS-343 User Manual
34
If you are behind a router, you will need to forward the FTP port from the router to the DNS-343. Additional filtering and firewall settings may need to be modified on your
router to allow FTP Access to the DNS-343 from the Internet. Once the port has been forwarded on the router, users from the internet will access the FTP server through the
WAN IP address of the router.
If you are using a D-Link router, such as the WBR-2310 used in the example below, your port forwarding rule should be similar to the following:
Name:
IP Address:
Public Port:
Private Port:
Traffic Type:
Type a name for the DNS-343 FTP server rule.
Enter the IP address of the DNS-343.
Enter the public FTP port. By default, the port is 21.
Enter the private FTP port. By default, the port is 21.
Set the traffic type to TCP.
If you use an FTP port other than 21, then users accessing the FTP server using an FTP client will have to specify the non-standard port, and users who are using a browser
will have to specify the port in the URL
(e.g. ftp://ftp.dns343.com:3000, where the FTP port is 3000).
FTP Server behind a Router
