D-Link DNS-343 User Manual
58
Disk Diagnostics Page
S.M.A.R.T stands for “Self-Monitoring, Analysis, and Reporting Technology”. This is a
system on a hard drive used to monitor and report on the health of the drive. If the HD
is grayed out, then it does not support S.M.A.R.T.
Runs a quick S.M.A.R.T test. The test usually takes
less than 10 minutes. This test will check the electrical,
mechanical, and read performance of the hard drive.
The results are displayed as Passed/Failed on the web
UI and can also be sent as an email alert.
Runs an extended S.M.A.R.T test. This test requires
a lot more time to complete. However, it is a more
thorough and complete test when compared to the
Quick Test.
Enable this function in order to have the results of the
S.M.A.R.T test sent to you by e-mail.
Click on this button in order to create a scheduled
S.M.A.R.T test. You will be able to schedule a test on a
daily, weekly, and monthly basis.
Scan Disk will scan your system’s file system for errors
and/or corruption. After completion, any errors on your
file system will be displayed accordingly.
To run the S.M.A.R.T test, select the hard drive you
wish to perform the S.M.A.R.T test on. Then select
whether to run a Quick or Extended S.M.A.R.T test.
Then press “Start” to run the test.
Quick Test:
Extended Test:
Send Result By
Email:
Create Schedule:
Scan Disk:
