5 Configuration
D-Link Web Smart Switch User Manual
8
8
3
3
Figure 5.111 – Add Access Profile (IPv6 ACL UDP)
The Add ACL Profile IPv6 ACL UDP port page contains the following fields:
Field
Description
Source Port Mask
Defines the range of source Ports relevant to the ACL rules. (0=ignore,
1=check).
For example, to set 0 – 15, set mask of F.
Destination Port Mask
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 0 – 15, set mask of F.
Click Add button then the ACL profile is added.
NOTE: A combination of one or several filtering
masks can be selected simultaneously. The page
updates with the relevant field(s).
2) Selecting the field of interest will display the related columns in the lower part of the page. Enter the
filtering mask and click Apply when done. A filtering mask is to specify the digit that you want to check. For
example, if you want to check a network of 192.168.1.0/24, then you should enter the IP mask as
255.255.255.0.
Figure 5.112 – Access Rule List
NOTE: You cannot select Payload in a MAC ACL,
or L2 Header in IP ACL.
