5 Configuration
D-Link Web Smart Switch User Manual
8
8
5
5
NOTE: The switch begins the access rule with the
smallest access ID, so be careful in assigning the
ID for the expected results.
To modify an existing rule, please click on the Access ID hyperlink.
Figure 5.115 – ACL > Access Profile List > Access Rule List
ACL > ACL Finder
This page is used to help find a previously configured ACL entry. To search for an entry, enter the profile ID
from the drop-down menu, select a port that you wish to view, define the state and click Search. The table
on the lower half of the screen will display the entries. To delete an entry click the corresponding Delete
button.
Figure 5.116 – ACL > ACL Finder
PoE > PoE Global Settings (DGS-1500-28P only)
This page allows user to configure the global PoE settings of the device and also displays current PoE status
including RPS Status, Total PoE Power Budget, Power Used, Power Left and The percentage of system
power supplied.
Figure 5.117 – PoE > PoE Global Settings
PoE Power Threshold: To configure the maximum power for PoE function. The maximum PoE is from 15.4
to 740 Watts.
Power Shut Off Sequence: Defines the method used to deny power to a port once the threshold is reached.
The possible fields are:
Deny next port: When the power budget is exceeded, the next port attempting to power up is
denied, regardless of the port priority.
Deny low priority port: The port with the lower priority will be shut down to allow the higher priority
port to power up.
Click Apply to make the configurations take effects.
