5 Configuration
D-Link Web Smart Switch User Manual
90
View Type: Specify the configured OID is Included or Excluded that a SNMP manager can access.
Click Add to create a new view, Delete to remove an existing view.
SNMP > SNMP > SNMP Community
The SNMP Community page is used to maintain the SNMP community string of the switch. SNMP managers
using the same community string are permitted to gain access to the Switch's SNMP agent.
Figure 5.124 – SNMP > SNMP > SNMP Community
Community Name: Name of the community string
User Name (View Policy): Specify the read/write or read-only level permission for the MIB objects
accessible to the SNMP community.
Click Add to create a new SNMP community, Delete to remove an existing community.
SNMP > SNMP > SNMP Host
The SNMP Host page is to configure the SNMP trap recipients.
Figure 5.125 – SNMP > SNMP > SNMP Host
Host IP Address: Select IPv4 or IPv6 and specify the IP address of SNMP management host.
SNMP Version: Specify the SNMP version to be used to the management host.
Community String/SNMPv3 User Name: Specify the community string or SNMPv3 user name for the
management host.
Click Apply to create a new SNMP host, Delete to remove an existing host.
SNMP > SNMP > SNMP Engine ID
The Engine ID is a unique identifier used to identify the SNMPv3 engine on the Switch.
Input the Engine ID then click Apply to apply the changes and click Default resets to default value.
Figure 5.126 – SNMP > SNMP > SNMP Engine ID
