ENGLISH
DVA-2800
If any of the above items are missing, please contact your reseller/retailer.
Dual Band AC1600 ADSL2+/VDSL2 Modem Router with VoIP (DVA-2800)
Power Adapter
Ethernet Cable
xDSL Microfilter/Splitter
Quick Install Guide & Warranty Document
1
Connect the filter to your phone socket. Then connect the provided
phone cable from the MODEM port on the Microfilter to the DSL port of the
modem router.
2
Connect the Ethernet cable from the LAN port of the modem router to the
Ethernet port on your computer.
3
Plug the power adapter into your modem router and connect to an
available power outlet.
4
5
After the modem router has powered up, verify that the Power and
DSL LEDs are both lit.
Continue with the
Configuration
section.
Package Contents
QUICK INSTALLATION GUIDE
Connect your Modem Router - ADSL/VDSL
Power Adapter
DVA-2800
Phone Cable
DVA-2800
Microfilter
Ethernet Cable
DVA-2800
Computer
DSL Port
Minimum Requirements
Internet Provider Account Details
If you are using an Australian or New Zeleand ADSL/VDSL/NBN/UFB connection,
you will need your user name, password and any other relevant connection
details. If you do not have this information, contact your Internet provider.
VoIP Provider Account Details
If you are using an Australian or New Zeleand VoIP service, you will need your user
name, password and any other relevant connection details. If you do not have
this information, contact your VoIP provider.
Do not proceed until you have this information.
Before you Start
Internet Requirements:
• ADSL / VDSL / Cable / NBN / UFB
Internet Service
Web-based Configuration Requirements:
Device with the following:
• An installed Ethernet adapter or wireless adapter
Supported Browsers:
• Internet Explorer 7 or higher
• Safari 4 or higher
• Chrome
• Firefox
Configuration
Web Browser Setup
Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter ‘192.168.1.1’ into the address bar (
http://192.168.1.1)
. The Setup
Wizard should commence straight away without requring you to log in.
Note:
If you want to configure your modem
router from a wireless computer or mobile device,
connect to the router wirelessly by going to your
wireless utility on your device. The default Wi-Fi
Networks are D-Link DSL-2888A and D-Link DSL-
2888A 5Ghz.
When the Welcome screen appears, click
Next
to start the wizard.
Select your
WAN Access Type, Country
and
ISP
from the drop down menus.
All relevant information will auto fill. Click
Next
to continue
1
2
3
