xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- --------------- --------
10.53.13.94 TACACS 49 5 2 --------
Total Entries : 1
DES-6500:4#
create authen server_group
Purpose
Used to create a user-defined authentication server group.
Syntax
create authen server_group <string 15>
Description
This command will create an authentication server group. A server
group is a technique used to group TACACS/XTACACS/
and RADIUS server hosts into user defined categories for
authentication using method lists. The user may add up to eight (8)
authentication server hosts to this group using the
config authen
server_group
command.
Parameters
<string 15>
- Enter an alphanumeric string of up to 15 characters to
define the newly created server group.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To create the server group “group_1”:
DES-6500:4#create authen server_group group_1
Command: create authen server_group group_1
Success.
DES-6500:4#
config authen server_group
Purpose
Used to configure a user-defined authentication server group.
Syntax
config authen server_group [tacacs | xtacacs | | radius |
<string 15>] [add | delete] server_host <ipaddr> protocol
[tacacs | xtacacs | | radius]
Description
This command will configure an authentication server group. A
server group is a technique used to group
TACACS/XTACACS/ and RADIUS server hosts into user
defined categories for authentication using method lists. The user
may define the type of server group by protocol or by previously
defined server group. Up to eight (8) authentication server hosts
may be added to any particular group.
Parameters
server_group
- The user may define the group by protocol groups
b ilt i t th S it h (TACACS/XTACACS/TACACS /RADIUS)
b
169
