xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
config ssh server
Purpose
Used to configure the SSH server.
Syntax
config ssh server {maxsession <int 1-8> | contimeout <sec 120-
600> | authfail <int 2-20> | rekey [10min | 30min | 60min | never] |
port <tcp_port_number 1-65535>}
Description
This command allows you to configure the SSH server.
Parameters
maxsession <int 1-8>
- Allows the user to set the number of users
that may simultaneously access the Switch. The default is 8.
contimeout <sec 120-600> -
Allows the user to set the connection
timeout. The user may set a time between 120 and 600 seconds.
The default is 120 seconds.
authfail <int 2-20>
- Allows the administrator to set the maximum
number of attempts that a user may try to logon utilizing SSH
authentication. After the maximum number of attempts is exceeded,
the Switch will be disconnected and the user must reconnect to the
Switch to attempt another login.
rekey [10min | 30min | 60min | never]
- Sets the time period that the
Switch will change the security shell encryptions.
port <tcp_port_number 1-65535>
- The TCP port number of the
server. TCP ports are numbered between 1 and 65535. The “well-
known” port for the SSH management software is 22.
Restrictions Only
administrator-level users can issue this command.
Usage Example:
To configure the SSH server:
DES-6500:4# config ssh server maxsession 2 contimeout 300 authfail 2
Command: config ssh server maxsession 2 contimeout 300 authfail 2
Success.
DES-6500:4#
show ssh server
Used to display the SSH server setting.
show ssh server
This command allows you to display the current SSH server setting.
Parameters None.
Restrictions None.
Purpose
Syntax
Description
Usage Example:
To display the SSH server:
179
