xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show device_status
Purpose
Used to display the current status of the hardware of the Switch.
Syntax
show device_status
Description
This command displays the current status of the Switch’s physical
elements.
Parameters None.
Restrictions None.
Example usage:
To show the current hardware status of the Switch:
DES-6500:4#show device_status
Command: show device_status
RPS1 Status:
Output voltage: Normal
FAN1: Normal
FAN2: Normal
RPS2 Status:
Not Exist
System FAN1: Normal
System FAN2: Normal
System FAN3: Normal
System FAN4: Normal
DES-6500:4#
show serial_port
Purpose
Used to display the current serial port settings.
Syntax
show serial_port
Description
This command displays the current serial port settings.
Parameters None.
Restrictions None.
Example usage:
To display the serial port settings:
DES-6500:4#show serial_port
Command: show serial_port
Baud Rate : 115200
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DES-6500:4#
16
