xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#enable clipaging
Command: enable clipaging
Success.
DES-6500:4#
disable clipaging
Purpose
Used to disable the pausing of the console screen scrolling at
the end of each page when the show command displays more
than one screen of information.
Syntax
disable clipaging
Description
This command is used to disable the pausing of the console
screen at the end of each page when the show command
would display more than one screen of information.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-6500:4#disable clipaging
Command: disable clipaging
Success.
DES-6500:4#
enable telnet
Purpose
Used to enable communication with and management of the
Switch using the Telnet protocol.
Syntax
enable telnet <tcp_port_number 1-65535>
Description
This command is used to enable the Telnet protocol on the
Switch. The user can specify the TCP or UDP port number the
Switch will use to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535>
−
The TCP port number. TCP
ports are numbered between 1 and 65535. The “well-known”
TCP port for the Telnet protocol is 23.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable Telnet and configure port number:
DES-6500:4#enable telnet 23
Command: enable telnet 23
Success.
DES-6500:4#
18
