xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
-------------------- ------------------------- ----------
ReadView 1 Included
WriteView 1 Included
NotifyView 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Included
Total Entries: 11
DES-6500:4#
create snmp community
Purpose
Used to create an SNMP community string to define the relationship
between the SNMP manager and an agent. The community string acts
like a password to permit access to the agent on the Switch. One or
more of the following characteristics can be associated with the
community string:
An Access List of IP addresses of SNMP managers that are permitted to
use the community string to gain access to the Switch’s SNMP agent.
An MIB view that defines the subset of all MIB objects that will be
accessible to the SNMP community.
Read-write or read-only level permission for the MIB objects accessible
to the SNMP community.
Syntax
create snmp community <community_string 32> view <view_name
32> [read_only | read_write]
Description
The
create snmp community
command is used to create an SNMP
community string and to assign access-limiting characteristics to this
community string.
Parameters
<community_string 32>
−
An alphanumeric string of up to 32 characters
that is used to identify members of an SNMP community. This string is
used like a password to give remote SNMP managers access to MIB
objects in the Switch’s SNMP agent.
view <view_name 32>
−
An alphanumeric string of up to 32 characters
that is used to identify the group of MIB objects that a remote SNMP
manager is allowed to access on the Switch.
read_only
−
Specifies that SNMP community members using the
community string created with this command can only read the contents
of the MIBs on the Switch.
read_write
−
Specifies that SNMP community members using the
community string created with this command can read from and write to
the contents of the MIBs on the Switch.
Restrictions Only
administrator-level users can issue this command.
37
