xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To configure the Switch location for “
HQ 5F
”:
DES-6500:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-6500:4#
config snmp system_name
Purpose
Used to configure the name for the Switch.
Syntax
config snmp system_name {<sw_name>}
Description
The
config snmp system_name
command configures the name
of the Switch.
Parameters
<sw_name>
- A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the Switch name for “
DES-6500 Chassis Switch
”:
DES-6500:4#config snmp system_name DES-6500 Chassis Switch
Command: config snmp system_name DES-6500 Chassis Switch
Success.
DES-6500:4#
enable rmon
Purpose
Used to enable RMON on the Switch.
Syntax
enable rmon
Description
This command is used, in conjunction with the
disable rmon
command below, to enable and disable remote monitoring
(RMON) on the Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To enable RMON:
50
