xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#show stack_information
Command: show stack_information
Box Prio- Prom Runtime H/W
ID Type Exist rity version version version
--- ----------- ----- ----- -------- -------- --------
1 DES-6507 exist 16 2.00-B20 3.00-B29 1A1
2 USR-NOT-CFG no
3 USR-NOT-CFG no
4 USR-NOT-CFG no
5 USR-NOT-CFG no
6 USR-NOT-CFG no
7 USR-NOT-CFG no
8 USR-NOT-CFG no
--------------------------------------------------------------------------------------------------
Topology :STAR
Current state :MASTER
Box Count :1
DES-6500:4#
clear counters
Purpose
Used to clear the Switch’s statistics counters.
Syntax
clear counters {ports <portlist>}
Description
This command will clear the counters used by the Switch to compile
statistics.
Parameters
ports <portlist>
−
Specifies a range of ports to be displayed. The
port list is specified by listing the lowest slot number and the
beginning port number on that slot, separated by a colon. Then the
highest slot number, and the highest port number of the range (also
separated by a colon) are specified. The beginning and end of the
port list range are separated by a dash. For example, 1:3 specifies
slot number 1, port 3. 2:4 specifies slot number 2, port 4. 1:3-2:4
specifies all of the ports between slot 1, port 3 and slot 2, port 4
−
in
numerical order.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To clear the counters:
DES-6500:4#clear counters ports 2:7-2:9
Command: clear counters ports 2:7-2:9
Success.
DES-6500:4#
62
