DES-6500
16
VLAN C
OMMANDS
The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create vlan
<vlan_name 32>
tag <vlanid 2-4094>
advertisement
delete vlan
<vlan_name 32>
config vlan
<vlan_name 32>
add [tagged|untagged|forbidden]
delete
<portlist>
advertisement [enable|disable]
config gvrp
<portlist>
all
state [enable|disable]
ingress_checking [enable|disable]
acceptable_frame [tagged_only | admit_all]
pvid <vlanid 1-4094>
enable gvrp
disable gvrp
show vlan
<vlan_name 32>
show gvrp
<portlist>
Each command is listed, in detail, in the following sections.
create vlan
Purpose
Used to create a VLAN on the switch.
Syntax
create vlan <vlan_name 32> {tag <vlanid 2-4094>|advertisement}
Description
This command allows you to create a VLAN on the switch.
Parameters
<vlan_name 32>
−
The name of the VLAN to be created.
<vlanid>
−
The VLAN ID of the VLAN to be created. Allowed values = 2-
4094
advertisement
−
Specifies that the VLAN is able to join GVRP.
Restrictions
Each VLAN name can be up to 32 characters. If the VLAN is not given
a tag, the system will automatically assign a VLAN ID number for the
VLAN. Only administrator-level users can issue this command.
Example usage:
To create a VLAN v1, tag 2:
Summary of Contents for TM DES-6500
