DES-6500
config vlan
the switch.
<portlist>
−
A range of ports to add to the VLAN. The port list is
specified by listing the lowest slot number and the beginning port
number on that slot, separated by a colon. Then the highest slot
number, and the highest port number of the range (also separated by a
colon) are specified. The beginning and end of the port list range are
seperated by a dash. For example, 1:3 specifies slot number 1, port 3.
2:4 specifies slot number 2, port 4. 1:3-2:4 specifies all of the ports
between slot 1, port 3 and slot 2, port 4
−
in numerical order.
advertisement [enabled|disabled]
−
Enables or disables GVRP on the
specified VLAN.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To add 4 through 8 of module 2 as tagged ports to the VLAN v1:
DES-6500:4#config vlan v1 add tagged 2:4-2:8
Command: config vlan v1 add tagged 2:4-2:8
Success.
DES-6500:4#
config gvrp
Purpose
Used to configure GVRP on the switch.
Syntax
config gvrp [<portlist> | all] {state [enabled |
disabled]|{ingress_checking [enabled | disabled] |
acceptable_frame [tagged_only | admit_all] | pvid <vlanid 1-4094>}
Description
This command is used to configure the Group VLAN Registration
Protocol on the switch. You can configure ingress checking, the sending
and receiving of GVRP information, and the Port VLAN ID (PVID).
Summary of Contents for TM DES-6500
