Command Parameters
show auth_client
{ports [<portlist>|all]}
show auth_session statistics
{ports [<portlist>|all]}
show auth_statistics
{ports [<portlist>|all]}
show auth_diagnostics
Each command is listed, in detail, in the following sections.
enable 802.1x
Purpose
Used to enable the 802.1x server on the switch.
Syntax
enable 802.1x
Description
The
enable 802.1x
command enables the 802.1x Port-based Network
Access control server application on the switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable 802.1x switch wide:
DES-6500:4#enable 802.1x
Command: enable 802.1x
Success.
DES-6500:4#
disable 802.1x
Purpose
Used to disable the 802.1x server on the switch.
Syntax
disable 802.1x
Description
The
disable 802.1x
command is used to disable the 802.1x Port-based
Network Access control server application on the switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable 802.1x on the switch:
Summary of Contents for TM DES-6500
