DES-6500:4# config traffic_segmentation 1-10 forward_list 11-
15
Command: config traffic_segmentation 1-10 forward_list 11-
15
Success.
DES-6500:4#
show traffic_segmentation
Purpose
Used to display the current traffic segmentation configuration on the
switch.
Syntax
show traffic_segmentation {<portlist>}
Description
The
show traffic_segmentation
command is used to display the
current traffic segmentation configuration on the switch.
Parameters
<portlist>
−
Specifies a range of ports for which the current traffic
segmentation configuration on the switch will be displayed. The port list
is specified by listing the lowest slot number and the beginning port
number on that slot, separated by a colon. Then the highest slot
number, and the highest port number of the range (also separated by a
colon) are specified. The beginning and end of the port list range are
separated by a dash. For example, 1:3 specifies slot number 1, port 3.
2:4 specifies slot number 2, port 4. 1:3-2:4 specifies all of the ports
between slot 1, port 3 and slot 2, port 4
−
in numerical order.
Restrictions
The port lists for segmentation and the forward list must be on the same
switch.
Example usage:
To display the current traffic segmentation configuration on the switch.
Summary of Contents for TM DES-6500
