DES-6500
config sntp
Restrictions
Only administrator-level users can issue this command. SNTP service
must be enabled for this command to function (enable sntp).
Example usage:
To configure SNTP settings:
show sntp
Purpose
Used to display the SNTP information.
Syntax
show sntp
Description
This command will display SNTP settings information including the
source IP address, time and poll interval.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To display SNTP configuration information:
enable sntp
Purpose
Enables SNTP service support.
DES-6500:4#config sntp primary 10.1.1.1 secondary 10.1.1.2
poll-interval 30
Success.
DES-6500:4#
DES-6500:4#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Poll Interval : 30 sec
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
DES-6500:4#
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2
poll-interval 30
Summary of Contents for TM DES-6500
