DES-6500
24
ARP C
OMMANDS
Parameters
The ARP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command
create arpentry
<ipaddr>
<macaddr>
delete arpentry
[<ipaddr>|all]
ipif <ipif_name 12>|ipaddress <ipaddr>|static}
time <value 0-65535>
show arpentry
config arp_aging
clear arptable
Each command is listed, in detail, in the following sections.
create arpentry
Used to make a static entry into the ARP table.
Syntax
create arpentry <ipaddr> <macaddr>
Description
This command is used to enter an IP address and the corresponding
MAC address into the switch’s ARP table.
Parameters
<ipaddr>
−
The IP address of the end node or station.
<macaddr>
−
The MAC address corresponding to the IP address
above.
Only
administrator-level users can issue this command.
Purpose
Restrictions
Example Usage:
To create a static arp entry for the IP address 10.48.74.121 and MAC address 00:50:BA:00:07:36:
DES-6500:4#create arpentry 10.48.74.121 00-50-BA-00-07-36
Command: create arpentry 10.48.74.121 00-50-BA-00-07-36
Success.
DES-6500:4#
delete arpentry
Purpose
Used to delete a static entry into the ARP table.
Syntax
delete arpentry {<ipaddr>|all}
Summary of Contents for TM DES-6500
