delete arpentry
Description
This command is used to delete a static ARP entry, made using the
create arpentry command above, by specifying either the IP address of
the entry or all. Specifying all clears the switch’s ARP table.
Parameters
<ipaddr>
−
The IP address of the end node or station.
all
−
deletes all ARP entries.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To delete an entry of IP address 10.48.74.121 from the ARP table:
DES-6500:4#delete arpentry 10.48.74.121
Command: delete arpentry 10.48.74.121
Success.
DES-6500:4#
config arp_aging
Purpose
Used to configure the age-out timer for ARP table entries on the switch.
Syntax
config arp_aging time <value 0-65535>
Description
This command sets the maximum amount of time, in minutes, that an
ARP entry can remain in the switch’s ARP table, without being
accessed, before it is dropped from the table.
Parameters
time <value>
−
The ARP age-out time, in minutes. The value may be
set in the range of 0-65535 minutes with a default setting of 20 minutes.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To configure ARP aging time:
Summary of Contents for TM DES-6500
