DES-6500
mettype 2
Local
0 to 16777214
mettype 1
mettype 2
Allowed Metric Type combinations are
mettype 1
or
mettype 2
. The metric value
0
above will be redistributed in OSPF as
the metric
20
.
Example Usage:
To add route redistribution settings:
DES-6500:4#create route redistribute dst ospf src rip
Command: create route redistribute dst ospf src rip
DES-6500:4#
Success.
create route redistribute dst rip src
Purpose
Used to add route redistribution settings for the exchange of OSPF
routes to RIP routes on the switch.
Syntax
create route redistribute dst rip src {local | internal | external |
extType1 | extType2 | inter+e1 | inter+e2}] {metric <value 0-16>}
Description
This command will redistribute routing information between the
OSPF and Rip routing protocols to all routers on the network that
are running OSPF or RIP. Routing information entered into the
Static Routing Table on the local DGS-3324SRi switch is also
redistributed
Parameters
src {all | internal | external | extType1 | extType2 | inter+e1 |
inter+e2}
−
Allows the selection of the protocol of the source device.
metric <value 0-16>
−
Allows the entry of an OSPF interface cost.
this is analogous to a HOP Count in the RIP routing protocol.
Restrictions Only
administrator-level users can issue this command.
Routing information source
−
OSPF and the Static Route table. Routing information will be redistributed to RIP. The
following table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be
redistributed.
Route Source
Metric
Type
OSPF
0 to 16
type_2
all
type_1
internal type_1
internal type_2
external
internal
Static
0 to 16
not applicable
Entering the
Type
combination
−
internal type_1 type_2
is functionally equivalent to
all
. Entering the combination
type_1
type_2
is functionally equivalent to
external
. Entering the combination
internal external
is functionally equivalent to
all
.
Entering the metric
0
specifies transparency.
Example Usage:
Summary of Contents for TM DES-6500
