DES-6500
To configure the IGMP for the IP interface System:
DES-6500:4#config igmp all version 1 state enabled
Command: config igmp all version 1 state enabled
Success.
DES-6500:4#
show igmp
Purpose
Used to display the IGMP configuration for the switch of for a specified
IP interface.
Syntax
show igmp {ipif <ipif_name>}
Description
This command will display the IGMP configuration for the switch if no IP
interface name is specified. If an IP interface name is specified, the
command will display the IGMP configuration for that IP interface.
Parameters
<ipif_name>
−
The name of the IP interface for which the IGMP
configuration will be displayed.
Restrictions none.
Example Usage:
To display IGMP configurations:
DES-6500:4#show igmp
Command: show igmp
Interface IP Address Ver- Query Maximum Robust- Last Member State
sion Response ness Query
Time Value Interval
------------ --------------- ---- ------ -------- ------- ----- -------
System 10.90.90.90 1 125 10 2 1 Enabled
Develop 20.1.1.1 1 125 10 2 1 Enabled
Total Entries: 2
DES-6500:4#
Summary of Contents for TM DES-6500
