enable dnsr
Syntax
enable dnsr {cache|static}
Description
This command is used, in combination with the
disable dnsr
command
below, to enable and disable DNS Relay on the switch.
Parameters
cache – This parameter will allow the user to enable the cache lookup
for the DNS rely on the switch.
static - This parameter will allow the user to enable the static table
lookup for the DNS rely on the switch.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To enable DNS relay:
DES-6500:4#enable dnsr
Command: enable dnsr
Success.
DES-6500:4#
Example Usage:
To enable cache lookup for DNS relay.
DES-6500:4#enable dnsr cache
Command: enable dnsr cache
Success.
DES-6500:4#
Summary of Contents for TM DES-6500
