DES-6500
Example Usage:
To enable static table lookup for DNS relay.
disable dnsr
Purpose
Used to disable DNS relay on the switch.
Syntax
disable dnsr {cache|static}
Description
This command is used, in combination with the
enable dnsr
command
above, to enable and disable DNS Relay on the switch.
Parameters
cache – This parameter will allow the user to disable the cache lookup
for the DNS rely on the switch.
static - This parameter will allow the user to disable the static table
lookup for the DNS rely on the switch.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To disable status of DNS relay.
Command: enable dnsr static
DES-6500:4#enable dnsr static
Success.
DES-6500:4#
DES-6500:4#disable dnsr
Command: disable dnsr
Success.
DES-6500:4#
Summary of Contents for TM DES-6500
