DES-6500
Usage Example:
To configure PIM settings for IP interface “System”:
enable pim
Purpose
Used to enable PIM function on the switch.
Syntax
enable pim
Description
This command will enable PIM for the switch. PIM settings must first be
configured for specific IP interfaces using
config pim
command.
Parameters None.
Restrictions Only
administrator-level users can use this command.
Usage Example:
To enable PIM as previously configured on the switch:
DES-6500:4#config pim ipif System hello 35 jp_interval 70
state enabled
Command: config pim ipif System hello 35 jp_interval 70 state
enabled
Success.
DES-6500:4#
DES-6500:4#enable pim
Command: enable pim
Success.
DES-6500:4#
disable pim
Purpose
Used to disable PIM function on the switch.
Syntax
disable pim
This command will disable PIM for the switch. Any previously configured
PIM settings will remain unchanged and may be enabled at a later time
with the
enable pim
.
Only
administrator-level users can use this command.
Description
Parameters None.
Restrictions
Usage Example:
Summary of Contents for TM DES-6500
