Usage Example
To configure an OSPF host route:
DES-6500:4#config ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
Command: config ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
Success.
DES-6500:4#
show ospf host_route
Purpose
Used to display the current OSPF host route table.
Syntax
show ospf host_route {<ipaddr>}
Description
This command will display the current OSPF host route table.
Parameters
<ipaddr>
−
The IP address of the host.
Restrictions none.
Usage Example:
To display the current OSPF host route table:
DES-6500:4#show ospf host_route
Command: show ospf host_route
Total Entries: 2
Host Address Metric Area_ID TOS
--------------- --------------- ----------- ------
10.48.73.21 2 10.1.1.1 0
10.48.74.122 1 10.1.1.1 0
DES-6500:4#
create ospf aggregation
Purpose
Used to configure OSPF area aggregation settings.
Summary of Contents for TM DES-6500
