DES-6500
Usage Example
To display the current OSPF interface settings, for a specific OSPF interface:
DES-6500:4#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name: ipif2 IP Address: 123.234.12.34/24 ((Link Up)
Network Medium Type: BROADCAST Metric: 1
Area ID: 1.0.0.0 Administrative State: Enabled
Priority: 1 DR State: DR
DR Address: 123.234.12.34 Backup DR Address: None
Hello Interval: 10 Dead Interval: 40
Transmit Delay: 1 Retransmit Time: 5
Authentication: None
Total Entries: 1
DES-6500:4#
show ospf all
Purpose
Used to display the current OSPF settings of all the OSPF interfaces on
the switch.
Syntax
show ospf all
Description
This command will display the current OSPF settings for all OSPF
interfaces on the switch.
Parameters none.
Restrictions none.
Summary of Contents for TM DES-6500
