DES-6500
config ospf virtual_link
<key_id>
−
A previously configured MD5 key. A value between 1 and
255 seconds can be entered.
Restrictions Only
administrator-level users can issue this command.
Usage Example
To configure the OSPF virtual interface settings:
DES-6500:4#config ospf virtual_link 10.1.1.2 20.1.1.1
hello_interval 10
Command: config ospf virtual_link 10.1.1.2 20.1.1.1
hello_interval 10
Success.
DES-6500:4#
create ospf virtual_link
Purpose
Used to create an OSPF virtual interface.
Syntax
create ospf virtual_link <area_id> <neighbor_id> {hello_interval
<sec>/authentication [none/simple <password>/md5 <key_id>]}
Description
This command is used to create an OSPF virtual interface.
Parameters
<area_id>
−
A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
<neighbor_id>
−
The OSPF router ID for the remote area. This is a 32-
bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the remote area’s Area Border Router. The router ID of the
neighbor router.
hello_interval <sec>
−
Allows the specification of the interval between
the transmission of OSPF Hello packets, in seconds. Between 1 and
65535 seconds can be specified. The Hello Interval, Dead Interval,
Authorization Type, and Authorization Key should be the same for all
routers on the same network.
Parameters
dead_interval <sec>
−
dead_interval <sec>
−
Allows the specification of
the length of time between the receipt of Hello packets from a neighbor
router before the selected area declares that router down. An interval
between 1 and 65535 seconds can be specified. The Dead Interval
must be evenly divisible by the Hello Interval.
<password>
−
A case-sensitive password.
<key_id>
−
A previously configured MD5 key ID (1 to 255).
Restrictions Only
administrator-level users can issue this command.
Usage Example
To create an OSPF virtual interface:
Summary of Contents for TM DES-6500
