create snmp user
Purpose
Used to create a new SNMP user and adds the user to an SNMP group
that is also created by this command.
Syntax
create snmp user <SNMP_name 32> <groupname 32> {encrypted
[by_password auth [md5 <auth_password 8-16 > | sha
<auth_password 8-20 >] priv [none | des <priv_password 8-
16> ]|by_key auth [md5 <auth_key 32-32>| sha <auth_key 40-40>]
priv [none | des <priv_key 32-32> ]]}
Description
The
create snmp user
command creates a new SNMP user and adds
the user to an SNMP group that is also created by this command.
Parameters
<SNMP_name 32>
−
An alphanumeric name of up to 32 characters that
will identify the new SNMP user.
<groupname 32>
−
An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
by_password – Requires the SNMP user to enter a password for
authentication and privacy. The password is defined by specifying the
auth_password below. This method is recommended.
by_key - Requires the SNMP user to enter a encryption key for
authentication and privacy. The key is defined by specifying the
priv_password below. This method is not recommended.
Message integrity
−
ensures that packets have not been tampered with
during transit.
Authentication
−
determines if an SNMP message is from a valid
source.
Encryption
−
scrambles the contents of messages to prevent it being
viewed by an unauthorized source.
encrypted – Specifies that the password will be in an encrypted format.
auth [md5|sha] – Initiate an authentication-level setting session.
md5
−
Specifies that the HMAC-MD5-96 authentication level will be
used.
sha
−
Specifies that the HMAC-SHA-96 authentication level will be
used.
<auth_password 8-20>
−
An alphanumeric string of between 8 and 20
characters that will be used to authorize the agent to receive packets for
the host.
des <priv_password 8-16>
−
An alphanumeric string of between 8 and
16 characters that will be used to encrypt the contents of messages the
host sends to the agent.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To create an SNMP user on the switch:
Summary of Contents for TM DES-6500
