show snmp view
Purpose
Used to display an SNMP view previously created on the switch.
Syntax
show snmp view {<view_name 32>}
Description
The
show snmp view
command displays an SNMP view previously
created on the switch.
Parameters
<view_name 32>
−
An alphanumeric string of up to 32 characters that
identifies the SNMP view that will be displayed.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To display SNMP view configuration:
DES-6500:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
-------------------- ------------------------- ----------
ReadView 1 Included
WriteView 1 Included
NotifyView 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Included
Total Entries: 11
DES-6500:4#
Summary of Contents for TM DES-6500
