DES-6500
DES-6500:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
-------------------------------- -------------------------------- ------------
dlink ReadView read_write
private CommunityView read_write
public CommunityView read_only
Total Entries: 3
config snmp engineID
Purpose
Used to configure a name for the SNMP engine on the switch.
Syntax
config snmp engineID <snmp_engineID 10-32>
Description
The
config snmp engineID
command configures an identifier for the
SNMP engine on the switch.
Parameters
<snmp_engineID 10-32>
−
An alphanumeric string that will be used to
identify the SNMP engine on the switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To give the SNMP agent on the switch the name “0035636666”
DES6500:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DES-6500:4#
show snmp engineID
Purpose
Used to display the identification of the SNMP engine on the switch.
Syntax
show snmp engineID
Description
The
show snmp engineID
command displays the identification of the
SNMP engine on the switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To display the current name of the SNMP engine on the switch:
Summary of Contents for TM DES-6500
