DES-6500:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DES-6500:4#
create snmp group
Purpose
Used to create a new SNMP group, or a table that maps SNMP users to
SNMP views.
Syntax
create snmp group <groupname 32> [v1|v2c|v3
[noauth_nopriv|auth_nopriv|auth_priv]] [read_view <view_name
32>|write_view <view_name 32>|notify_view <view_name 32>]
Description
The
create snmp group
command creates a new SNMP group, or a
table that maps SNMP users to SNMP views.
Parameters
<groupname 32>
−
An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
v1 – Specifies that SNMP version 1 will be used. The Simple Network
Management Protocol (SNMP), version 1, is a network management
protocol that provides a means to monitor and control network devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 will be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds:
Message integrity
−
ensures that packets have not been tampered with
during transit.
Authentication
−
determines if an SNMP message is from a valid
source.
Encryption
−
scrambles the contents of messages to prevent it being
viewed by an unauthorized source.
noauth_nopriv
−
Specifies that there will be no authorization and no
encryption of packets sent between the switch and a remote SNMP
manager.
auth_nopriv
−
Specifies that authorization will be required, but there will
be no encryption of packets sent between the switch and a remote
SNMP manager.
auth_priv
−
Specifies that authorization will be required, and that
packets sent between the switch and a remote SNMP manger will be
encrypted.
Summary of Contents for TM DES-6500
