show snmp groups
Purpose
Used to display the group-names of SNMP groups currently configured
on the switch. The security model, level, and status of each group are
also displayed.
Syntax
show snmp groups
Description
The
show snmp groups
command displays the group-names of SNMP
groups currently configured on the switch. The security model, level,
and status of each group are also displayed.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To display the currently configured SNMP groups on the switch:
DES-6500:4#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group Name : Group3
ReadView Name : ReadView
WriteView Name : WriteView
Notify View Name : NotifyView
Security Model : SNMPv3
Security Level : NoAuthNoPriv
Group Name : Group4
ReadView Name : ReadView
WriteView Name : WriteView
Notify View Name : NotifyView
Security Model : SNMPv3
Security Level : authNoPriv
create snmp host
Purpose
Used to create a recipient of SNMP traps generated by the switch’s
SNMP agent.
Syntax
create snmp host <ipaddr> [v1|v2c|v3
[noauth_nopriv|auth_nopriv|auth_priv]] <auth_string 32>
Description
The
create snmp host
command creates a recipient of SNMP traps
generated by the switch’s SNMP agent.
Summary of Contents for TM DES-6500
