create syslog host
Numerical Severity
Code
0 Emergency: system is unusable
1 Alert: action must be taken immediately
2 Critical: critical conditions
3 Error: error conditions
4 Warning: warning conditions
5 Notice: normal but significant condition
6 Informational: informational messages
7 Debug: debug-level messages
informational
−
Specifies that informational messages will be sent to the
remote host. This corresponds to number 6 from the list above.
warning
−
Specifies that warning messages will be sent to the remote
host. This corresponds to number 4 from the list above.
all
−
Specifies that all of the currently supported syslog messages that
are generated by the switch will be sent to the remote host.
facility
−
Some of the operating system daemons and processes have
been assigned Facility values. Processes and daemons that have not
been explicitly assigned a Facility may use any of the"local use"
facilities or they may use the "user-level" Facility. Those Facilities that
have been designated are shown in the following: Bold font indicates
the facility values that the switch currently supports.
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security|authorization messages
5 messages generated internally by syslog
6 line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security|authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
Summary of Contents for TM DES-6500
